*TANPA SFP
Model : EPT1008GH
DDR :  512M
FLASH :  16M
Uplink : QTY-  8
Copper :  4*10/100/1000Mauto-negotiable,RJ45
SFP :- 4 1G/10G SFP
PON : QTY-  8
Physical Interface : 8 SFP slots
Connector Type :  1000BASE-PX20+/PX20++/PX20+++
Max splitting ratio :- 1  :  64  
Management Ports : CONSOLE port/NMS PORT
Power Input AC :  100V~240V AC 47/63Hz
Lightning : Service port has lightning protection
Maintenance  : Telnet remote maintenance
Temperature : -10°C ~ 60°C
Humidity : 5% ~ 95%

Support standard :
- IEEE 802.3ah EPON
- IEEE802.3(10Base-T)
- IEEE802.3u(100Base-TX)
- IEEE802.3z(1000BASE-X)
- IEEE802.3ab(1000Base-T)
- IEEE802.1Q(VLAN)
- IEEEE802.1d(STP)
- IEEEE802.1W(RSTP)
- IEEE802.1p(COS)
- IEEE802.1x(Port Control)
- IEEE802.3x(flow-control)
- Each OLT interface supports at most 64 ONU;
- Transmission distance of each OLT is at most 20Km

PON function :
- Support auto register and confirm
- Blacklist and whitelist onu
- DBA configure
- P2P
- ONU authorization

Layer 2/3 function :
-   VLAN,QinQ,link convergency, broadcast strom control
-   Support at most 4094 VLAN;performance statistic
-   16K MAC address;mac address management
-   Port mirror / Static Trunk
-   Support RSTP
-   Storm control
-   Support IGMP Snooping/proxy
-   Support 512 router hosts
-   Support 64 router subnets
-   Limit quantity of maximum user at each port
-   Port isolation
-   Packe storm control
-   ACL access control based on data stream
-   QoS based on port, VID, TOS and MAC address;
-   Encrytion of PON port transmitting data
-   Support 802.1X authentication

Configuration and Management :
-   SNMP/NMS
-   WebGUI management
-   CLI, SNMP, TELNET,cluster etc.
-   SSHv1/v2
-   Software and bootrom upgrade by TFTP and FTP
-   Local server syslog to record system log
-   Chinese/English command prompt
-   Ping and traceroute
-   Debug/Log management
-   User management;
-   Alarm management.